Install acoustic cover
WARNING:
Hot surfaces.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
- Check the acoustic cover (2) for correct installation of all the rubber mounts (1).NOTE: RISK OF DAMAGE
Damage to the acoustic cover/design cover.
Jerky movements during disassembly and excessive application of force during installation may result in breakage of the acoustic cover/design cover.- Disassemble or mount the acoustic cover/design cover carefully.
- Disassemble or mount snap-lock couplings of the ball pivots one after the other.
- Disassemble or mount acoustic cover/design cover only at temperatures >20°C.
- Use only distilled water as an auxiliary material during installation, no lubricants.
- Clip in the acoustic cover (1) into the holders in the indicated areas.
The acoustic cover (1) must audibly engage into place.
