Tightening the VANOS central valve of the exhaust camshaft adjuster
- To tighten VANOS central valve (1), use reversible ratchet (2) from special tool 0 496 855
with special tool 2 450 487
.
- Tighten VANOS central valve (1) of the exhaust camshaft adjuster.
TIGHTENING TORQUES SPECIFICATION
| VANOS central valve to camshaft | ||
|---|---|---|
| M21 VANOS central valve on the thread and on the contact surface must be coated with engine oil. |
1. Joining torque 2. tightening torque |
50 Nm 140 Nm |
| M22 VANOS central valve on the thread and on the contact surface must be coated with engine oil. |
1. Joining torque 2. tightening torque |
50 Nm 140 Nm |
Follow-up work
- Refer to DISASSEMBLING ALL SPECIAL TOOLS
- Refer to INSTALL CHAIN TENSIONER .
- Refer to CHECKING THE TIMINGS OF THE CAMSHAFT .
- Refer to INSTALLING THE HEAT SHIELD ON THE CYLINDER HEAD
- Refer to INSTALL THE HOLDER OF THE POSITIVE BATTERY CABLE .