Install front underbody protection and/or front stiffening plate
NOTE:
TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.
Different variants may be installed depending on the vehicle equipment.
- Version A:
Insert the front underbody protection (1).
Tighten screws (arrows).
TIGHTENING TORQUES SPECIFICATION
| Underbody protection | ||
|---|---|---|
| Screw | Tightening torque | 3 Nm |
- Version B:
Position the front stiffening plate (1).
Replace screws (2).
Parts: Screws
Tighten the screws (2).
TIGHTENING TORQUES SPECIFICATION
| Stiffening plate to front axle support | ||
|---|---|---|
| M8 Replace screws. |
Jointing torque | 25 Nm |
| Angle of rotation | 70° | |
- Tighten the screws (3).
- Tighten the screws (4).
TIGHTENING TORQUES SPECIFICATION
| Underbody protection | ||
|---|---|---|
| Screw | Tightening torque | 3 Nm |