Removing the support for the front bumper panel

Preliminary works 

• DEACTIVATE the 48 v electrical system.
• Disconnect all battery EARTH LEADS .
• Remove the left and right top engine compartment COVER .
• Remove front CROSS CONNECTION .
• Remove front ORNAMENTAL GRILLE .
• Partially remove the front section of the front wheel arch COVER
• Remove front BUMPER PANEL .
• Remove top automatic AIR FLAP CONTROL .
• Remove the bracing strut top front CROSS CONNECTION

• Unlock and disconnect connector (1).
• Remove the impact absorber (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1).
• Loosen screws (2).
• Loosen screws (3).

• Unfasten plug connection.
• Feed out the support for the front bumper panel (4) together with the support for the front bumper panel at the bottom.

Courtesy of BMW OF NORTH AMERICA, INC.