Remove cowl panel cover
NOTE:
TECHNICAL INFORMATION
Before installing the cowl panel cover it is mandatory to check that the 48 V line is routed correctly and fitted tightly.
An incorrectly laid or attached 48 V line can be damaged by the wiper kinematics.
Before installing the cowl panel cover it is mandatory to check that the 48 V line is routed correctly and fitted tightly.
An incorrectly laid or attached 48 V line can be damaged by the wiper kinematics.
Preliminary works
- Remove the rear left engine compartment COVER
- Remove the rear right engine compartment COVER .
- Remove left and right WIPER ARM .
- Release the cowl panel cover (1) from the latch mechanisms (2) and (3).
- Pull off the cowl panel cover (1) towards the top, starting from the side.
