Adjust locking striker
Prerequisite
Screws on the locking wedge have been loosened to such an extent that the locking wedge can be moved.
NOTE:
TECHNICAL INFORMATION
The gap dimensions form the basis for these repair instructions and must be observed without fail.
For more information see: 41 00...BODY GAP DIMENSIONS for body
The gap dimensions form the basis for these repair instructions and must be observed without fail.
For more information see: 41 00...BODY GAP DIMENSIONS for body
- Adjust the height of the locking wedge so that the door lock does not hit or drag.
- Move the striker sideways to set the gap between the door and the side panel at the rear.
- Tighten screws (1).
TIGHTENING TORQUES SPECIFICATION
| Lock striker | ||
| Screw | Tightening torque | 21 Nm |
