Removing the airbag control unit
Preliminary works
- Deactivate the 48 v ELECTRICAL SYSTEM .
- Disconnect all battery EARTH LEADS .
- Remove the center armrest STORAGE COMPARTMENT .
- Remove the rear center CONSOLE TRIM .
- Remove the center ARMREST .
- Remove the front storage COMPARTMENT TRIM .
- Remove the center CONSOLE TRIM .
- Remove CUPHOLDER .
- Remove the pedal mechanism TRIM PANEL .
- Remove the right FOOTWELL TRIM .
- Remove the CENTER CONSOLE .
WARNING:
Airbag unit. Danger! Life-threatening injuries!
- Before performing any work on the airbag, always disconnect the battery earth lead from the battery.
- Airbag unit may only be set down with the cushion (airbag itself) facing upwards.
- For additional information see: 72 00... SAFETY REGULATIONS on handling airbag system components/gas generators
NOTE:
RISK OF DAMAGE Electrostatic discharge. Damage to or destruction of electrical components.
- Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information see: 61 35... NOTES for ESD protection (electrostatic discharge)
