Install fan cowl
Follow-up work
- Refer to INSTALL THE REAR TOP CROSS CONNECTION .
- Refer to INSTALL FRONT CROSS CONNECTION .
- Refer to INSTALLING FRONT-END STRUT ON LEFT AND RIGHT .
- Refer to INSTALLING THE COVER ON THE LEFT AND RIGHT IN THE ENGINE COMPARTMENT AT THE TOP
- Refer to INSTALL RESONATOR .
- Feed in and install the fan cowl (3) in the direction of the arrow.
- Tighten the screws (2).
TIGHTENING TORQUES SPECIFICATION
| Fan cowl with electric fan on radiator | ||
|---|---|---|
| TS6x20 | Tightening torque | 6.5 Nm |
TIGHTENING TORQUES SPECIFICATION
| Fan cowl on radiator | ||
|---|---|---|
| Tightening torque | 6.5 Nm | |
| Tightening torque | 6 Nm | |
- Connect and lock the connector (1).
The connector (1) must engage audibly.
- If fitted:
Fasten the coolant line (1) below at the fan cowl with the clamps.
- Feed in and install coolant line (2).
- Lock clamps (1).
The clamps (1) must engage audibly.
