Installing the left external radiator

• Position the radiator (4) with the holder (3) in the rubber mounts diagonally downwards towards the front.
• Tighten down screw (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Holder for upper external radiator
  Screw	Tightening torque	11.8 Nm

• Tighten down screw (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUES SPECIFICATION
  
  

  Holder for side external radiator
  Screw	Tightening torque	3.5 Nm

• Slide the coolant lines (2) forwards.

  The retaining clips (1) must audibly engage.

  Courtesy of BMW OF NORTH AMERICA, INC.

  • If installed: Installing the cross-member 
• Position the cross-member (2).
• Tighten down screws (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE FRONT SECTION OF THE FRONT WHEEL ARCH COVER .
• Refer to INSTALLING THE FRONT LEFT BOTTOM WHEEL ARCH COVER .
• Refer to ATTACHING THE FRONT LEFT WHEEL .
• Refer to FILL AND VENT THE HIGH-TEMPERATURE COOLANT CIRCUIT .