Install transmission oil cooler

• Guide in and install the transmission oil cooler with cooler module mount (1) in the direction of the arrow.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in and lock the transmission oil cooler (1) in the bracket (2) at right.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Press cooling module (4) in the direction of the arrow and guide it into holder (5).
• Ensure that cooler module mount (3) fits correctly.
• Tighten down screw (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).

• Connect the transmission oil lines (2).
• Press the locking mechanism (1) in arrow direction and lock the transmission oil lines (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and install the cover (3) at the bottom left cooling module.
• Ensure that the lock (2) engages audibly.
• Ensure that the locking mechanism (1) engages audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Ensure that the locking mechanisms (1) engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in and install cover (3) on cooling module, bottom right.
• Ensure that the lock (2) engages audibly.
• Ensure that the locking mechanism (1) engages audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the cover (2) at bottom left front and install.
• Tighten down screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Feed out and remove the cable tie (2) from the cooling module (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and install the mounting element (1).
• Lock the locks (arrows).

  The locks (arrows) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up works 

• Refer to INSTALL THE COVER IN THE ENGINE COMPARTMENT ON TOP .
• Refer to CHECKING/TOPPING UP THE OIL LEVEL IN THE AUTOMATIC TRANSMISSION .
• Refer to INSTALL REAR UNDERBODY PROTECTION .
• Refer to INSTALLING THE UNDERBODY PROTECTION OF THE STEERING GEAR OR THE FRONT THRUST FIELD .
• Refer to INSTALL THE FRONT UNDERBODY PROTECTION OR FRONT THRUST FIELD .