When replacing the transmission oil cooler: Remount components

• Loosen screws (1).
• Remove cover (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screw (1).
• Guide out and remove the cooler module mount (2) from the transmission oil cooler (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

  Check 

  NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
• Check if stop pad (2) is present on the cooler module mount (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

Stop pad (2) is not present. 

Measure

• Replace stop pad (2).

Result 

Stop pad (2) is present. 

Measure

• Continue with the next step.
• Replace the transmission oil cooler (3).

  Parts:  Transmission oil cooler

• Guide in and install the cooler module mount (2).
• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Install the cover (2).
• Tighten down screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.