Installing the auxiliary coolant pump

• Check plug connections for residual coolant and remove residual coolant if necessary.
• Connect and audibly lock the connector (1) to the auxiliary coolant pump (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mount auxiliary coolant pump (3) to holder and secure with rubber band (1).
• Connect coolant hoses (2) to the auxiliary coolant pump and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING FAN COWL .
• Refer to INSTALL THE REAR TOP CROSS CONNECTION .
• Refer to INSTALL FRONT CROSS CONNECTION .
• Refer to INSTALLING FRONT-END STRUT ON LEFT AND RIGHT .
• Refer to INSTALLING THE COVER ON THE LEFT AND RIGHT IN THE ENGINE COMPARTMENT AT THE TOP
• Refer to FILL THE LOW-TEMPERATURE COOLING SYSTEM WITH THE VACUUM FILLING EQUIPMENT .
• Refer to VENTING THE LOW-TEMPERATURE COOLING SYSTEM .