Install coolant temperature sensor

• Insert and install the coolant temperature sensor (2).
• Tighten the coolant temperature sensor (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock the connector (1).
• Make sure the connector (1) engages audibly.
• Loosen sealing cap (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Equate coolant level to the maximum marking  (1) in the coolant expansion tank for maximum temperature (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Close sealing cap (1).
• Close the sealing cap (1) until the arrows  are flush.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up works 

• Refer to INSTALL INTAKE PLENUM .
• Refer to INSTALLING THE TANK VENT VALVE .
• Refer to INSTALL CONTROL UNIT BRACKET .
• Refer to INSTALL THE INTEGRATED POWER SUPPLY MODULE (PDM) .
• Refer to INSTALLING THE DME CONTROL UNIT .
• Refer to INSTALL RESONATOR .
• Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
• Refer to FILL AND VENT THE LOW-TEMPERATURE COOLANT CIRCUIT .
• Refer to INSTALLING ACOUSTIC COVER AT REAR
• Refer to INSTALLING ACOUSTIC COVER .
• Refer to INSTALL THE FRONT HOOD SEAL AT THE REAR .
• Refer to INSTALLING THE UNDERBODY PROTECTION OF THE STEERING GEAR OR THE FRONT THRUST FIELD .
• Refer to INSTALL THE FRONT UNDERBODY PROTECTION OR FRONT THRUST FIELD .
• Refer to TAKE HOOD OUT OF THE SERVICE POSITION .