Install the boost pressure sensor on the charge air line

• Replace the sealing ring (1) on the boost pressure sensor (2).

  Parts  : Sealing ring

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and install the boost pressure sensor (5).
• Tighten down screw (4).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Boost pressure sensor at the charge air line
  TS5x20	Tightening torque	4 Nm

• Connect and lock the connector (3).

  The connector (3) must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and install the wiring harness (2).
• Tighten down screw (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Wiring harness to intake plenum
  	Tightening torque	4 Nm

Follow-up work 

• Refer to INSTALL ACOUSTIC COVER .