Removing right intake filter housing with right front-end strut

Prerequisite

Acoustic cover removed

NOTE: TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.

Unfasten circlip (1).
Remove screws (arrows).

Courtesy of BMW OF NORTH AMERICA, INC.
Disconnect the upper section (1) of the clean air pipe from the lower part (2) of the clean air pipe.
Unlock the locks (3).
Feed out right intake filter housing with right front-end strut in upward direction and remove.

Courtesy of BMW OF NORTH AMERICA, INC.