Remove tank vent valve
NOTE:
DANGER
High voltage.
Mortal hazard through electric shock!
High voltage.
Mortal hazard through electric shock!
- Before removal, disconnect all components from the voltage supply: Switch off lighting system and ignition.
- For additional information see:
63 99... SAFETY INSTRUCTIONS FOR HANDLING BULBS/LIGHT SOURCES (EXTERIOR LIGHTING)
Preliminary work
- Refer to REMOVING THE ACOUSTIC COVER .
WARNING:
Hot surfaces.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
NOTE:
RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.
Electrostatic discharge.
Damage to or destruction of electrical components.
- Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information see: 61 35... NOTES ON ESD (ELECTROSTATIC DISCHARGE) PROTECTION
- Unlock and release the tank vent lines (arrows).
- Unlock and loosen connector (1).
- Remove the tank vent valve (2) from the holder (3).
