Installing the belt tensioner

• Position belt tensioner (2).
• Tighten down screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Belt tensioner to alternator
  M8 x 30	Tightening torque	28 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• If applicable, tension the belt tensioner at the hexagonal head (1) up to the stop.
• If applicable, secure the belt tensioner in place with special tool 0 496 268 (11 0 390). 

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE DRIVE BELT FOR ALTERNATOR .
• Refer to INSTALLING CHARGE AIR LINE .
• Refer to INSTALLING BOTTOM CLEAN AIR PIPE .
• Refer to INSTALLING THE RESONATOR WITH THE TOP CLEAN AIR PIPE .
• Refer to INSTALLING INTAKE SILENCER HOUSING .
• Refer to INSTALLING FAN COWL .
• Refer to INSTALLING THE REAR TOP CROSS CONNECTION .
• Refer to INSTALLING FRONT CROSS CONNECTION .
• Refer to INSTALLING FRONT-END STRUT ON LEFT AND RIGHT .
• Refer to INSTALLING THE COVER ON THE LEFT AND RIGHT IN THE ENGINE COMPARTMENT AT THE TOP .
• Refer to INSTALLING ACOUSTIC COVER .