00 01... Symbols used and information in repair instructions (530i 2017-2022, 530i xDrive 2017-2022, 530e PHEV 2018-2022, 530e xDrive PHEV 2018-2022, 540i 2017-2022, 540i xDrive 2017-2022, M550i xDrive 2018-2022)
WARNING:
Precautionary rules and measures which protect mechanics and other personnel against injury (including life-threatening injuries).
For example:
WARNING:
Risk of scalding!
Only perform this work after engine has cooled down.
Only perform this work after engine has cooled down.
IMPORTANT:
Specific instructions and precautionary measures which prevent damage to the vehicle or to vehicle parts. Failure to comply with the above will invalidate any warranty claims.
The caution symbol is used in all repair instructions.
However, use of the warning word "Caution!" is not binding in every case.
The notes, instructions and precautionary measures mentioned above retain their validity.
The caution symbol is used in all repair instructions.
However, use of the warning word "Caution!" is not binding in every case.
The notes, instructions and precautionary measures mentioned above retain their validity.
WARNING:
High-voltage system - danger to life!
Before beginning work, follow the applicable safety rules and perform the necessary preliminary work.
Before beginning work, follow the applicable safety rules and perform the necessary preliminary work.
NOTE:
High-voltage symbol for hybrid cars (electrically powered vehicles) E72 and MINI E.
WARNING:
High-voltage system - danger to life!
Before beginning work, follow the applicable safety rules and perform the necessary preliminary work.
Before beginning work, follow the applicable safety rules and perform the necessary preliminary work.
NOTE:
High-voltage symbol for hybrid car (electrically powered vehicle) from F04.
NOTE:
Particular information on improved procedures for operation, testing, adjustment and upkeep.
Also indicates the end of a repair section.
Recycling:
Observe country-specific waste disposal regulations
General information:
Refers to other instructions: such as e.g.:
Necessary preliminary tasks;
Further instructions: refer to manufacturer operating instructions for balancing machine.
Replacement:
Carry out PROGRAMING/ENCODING .
NOTE:
Many electronic control units must be programed/coded (e.g. when replaced).
NOTE:
Note (symbol for diagnostic system):
- Connect BMW diagnostic system using an appropriate scan tool
IMPORTANT:
Read and comply with NOTES
on protection against damage from electrostatic discharge (ESD protection).
NOTE:
Electronic control units and other electronic components - if handled incorrectly - can be damaged or destroyed by electrostatic discharge.
Special tools required:
NOTE:
List of special tools needed in these repair instructions.
IMPORTANT:
Do not oil or grease component or tool.
NOTE:
Oil and grease will impair or damage the function of the component or tool.
WARNING:
Laser beam!
For example:
Adjustment device emits laser beam. Do not look into the beam!
Note on laser class.
IMPORTANT:
Use eye protection for the following operations.
For example:
Gas can emerge spontaneously at high speed when the fuel supply line is released!
IMPORTANT:
Use ear protection for the following operations.
IMPORTANT:
Use eye protection and ear protection for the following operations.
IMPORTANT:
Use face protection for the following operations.
IMPORTANT:
Use protective gloves for the following operations.
Avoid skin contact.
Avoid skin contact.
IMPORTANT:
Use eye protection and protective gloves for the following operations.
Avoid eye contact and skin contact.
Avoid eye contact and skin contact.
WARNING:
Danger of explosion!
First aid measures:
Note on first aid measures that need to be administered immediately.