Fastening the spring strut holder on the left and right to the wishbone below
NOTE:
Perform the steps on the right and left side.
Fasten the spring strut holder on the bottom wishbone
NOTE:
TECHNICAL INFORMATION
Keep the connection of the spring strut holder to the spring strut clean and free from oil and grease.
Keep the connection of the spring strut holder to the spring strut clean and free from oil and grease.
NOTE:
Tighten the screw connection in the NORMAL POSITION
.
- Position spring strut holder on wishbone.
- Replace screw (2) and the nut (1).
Parts : Bolt and nut
- Install the screw (2).
- Tighten the nut (1) in NORMAL POSITION
.TIGHTENING TORQUES SPECIFICATION
Bottom wishbone on spring strut holder M14
Replace screw and nut.Tighten screw connection in normal position! Joining torque
165 NmAngle of rotation 90°
