Tighten the screws on the left and right front axle support

• Replace screws (1)  .

  Parts:  screw

• Tighten the screws (1)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Front axle carrier to body, front
  M12 Replace screws.	Joining torque  108 Nm Angle of rotation  45°

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace screws (2)  .

  Parts:  screw

• Tighten down screws (2)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Front axle support to center of body
  M12 Replace screws.	Joining torque  108 Nm Angle of rotation  45°

• Replace screws (3)  .

  Parts:  screw

• Tighten down screws (3)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Front axle carrier to body, rear
  M14 Replace screws.	Joining torque  108 Nm Angle of rotation  45°

  NOTE: Perform the steps on the right and left side.
• Replace screws (1)  .

  Parts:  screw

• Tighten the screws (1)  .

TIGHTENING TORQUES SPECIFICATION

Bottom bumper bracket on the front subframe.
M8x100 Replace screws.	Tightening torque  19 Nm

Courtesy of BMW OF NORTH AMERICA, INC.