Raise front axle support

If installed on left: Position spray guard 

• Position spray guard (1) on output shaft (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Lift the front axle support (1) and position it on the side member (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

  If installed on left: Install spray guard

  Position spray guard (2) on front axle support.

• Position screws (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Splash guard on front axle support
  M6	tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten screws (1) of spray guard (2).

Courtesy of BMW OF NORTH AMERICA, INC.