Installing the left hand front pipe

Tighten nuts (1).

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUES SPECIFICATION

Exhaust system/front silencer to catalytic converter
cl. If necessary, replace clamp.	Tightening torque	55 Nm

If necessary, replace clamp (1).
Parts: cl.
Slide the clamp (1) on to the center silencer (2).
Adapt the right hand front pipe to the center silencer (2).

Courtesy of BMW OF NORTH AMERICA, INC.
The opening of the clamp (2) must face outwards.

Tighten the nuts in the area (1) of the clamp (2).

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUES SPECIFICATION

cl.
Nuts	Tightening torque	45 Nm