Installing the actuator for the right exhaust flap

Position the heat shield (2).
Position the actuator for the exhaust flap (3).
Ensure that the shaft of the actuator for the exhaust flap and the shaft of the exhaust flap correctly engage with each other in the area (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Position the actuator for the exhaust flap (2).

Tighten down screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUES SPECIFICATION

Actuator for the exhaust flap
M6x16	Tightening torque	8.5 Nm