Installing the acoustic cover for the oil sump
- Insert and install the acoustic cover of the oil sump.
- Feed in all the expanding rivets (1) in the marked area and install them.
- Connect connectors (1) and lock.
- Make sure the connector (1) engages audibly.
- Secure clamps (2).
- Insert and install the positive battery cable (4).
- Secure positive battery cable (4) at the clamp (5).
- Tighten the nut (3) hand-tight.
CAUTION:
Improper routing of the positive battery cable.
Risk of short circuits!
Risk of short circuits!
- Route the positive battery cable without abrasions and do not trap.
- Attach the positive battery cable (1) correctly to anti-twist lock (2).
- Tighten nut (3).
TIGHTENING TORQUES SPECIFICATION
| Battery positive lead to starter | ||
|---|---|---|
| M8 | Tightening torque | 13.5 Nm |
Follow-up work
- Refer to INSTALLING THE REAR THRUST FIELD .
- Refer to CONNECTING NEGATIVE BATTERY CABLE .