Install the positive battery cable from the alternator to the auxiliary terminal for jump starting

Prerequisite

• Insert and install the positive battery cable (3).
• Secure clamps (2).
• Tighten nut (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and install the holder (2).
• Make sure the locking mechanism (arrow) engages correctly.
• Feed in the coolant hoses (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Fasten the positive battery cable (1) with the holders (arrows).

Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and install the positive battery cable (2).
• Tighten nut (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and install the cover (2) in the direction of the arrow.

  The locks (1) must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING CONTROL UNIT BRACKET .
• Refer to INSTALLING THE INTEGRATED POWER SUPPLY MODULE (PDM) .
• Refer to INSTALLING THE DME CONTROL UNIT .
• Refer to INSTALLING ACOUSTIC COVER AT REAR .
• Refer to INSTALLING ACOUSTIC COVER .
• Refer to INSTALLING THE CENTER COWL UPPER PART .
• Refer to INSTALLING TENSION STRUT ON SHOCK TOWER .
• Refer to INSTALLING WINDSHIELD PANEL COVER .
• Refer to INSTALLING LEFT AND RIGHT WIPER ARM .
• Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .
• Refer to INSTALLING THE REAR RIGHT ENGINE COMPARTMENT COVER .
• Refer to CONNECTING NEGATIVE BATTERY CABLE .