Removing the alternator
NOTE:
TECHNICAL INFORMATION
Make sure that the radiator is not damaged when removing the alternator. Cover the radiator with suitable materials (e.g. cardboard).
Make sure that the radiator is not damaged when removing the alternator. Cover the radiator with suitable materials (e.g. cardboard).
Preliminary work
- Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
- Refer to REMOVING THE COVER ON LEFT AND RIGHT IN THE ENGINE COMPARTMENT AT THE TOP .
- Refer to REMOVING THE LEFT AND RIGHT FRONT-END STRUT .
- Refer to REMOVING FRONT CROSS CONNECTION .
- Refer to REMOVING THE REAR TOP CROSS CONNECTION .
- Refer to REMOVING FAN COWL .
- Refer to REMOVING THE COOLANT EXPANSION TANK FOR THE LOW-TEMPERATURE COOLANT CIRCUIT .
- Refer to PARTIALLY REMOVING THE CHARGE AIR COOLER .
- Refer to REMOVING THE DRIVE BELT .
- Detach the cover (1) and release the nut below it.
- Disconnect positive battery cable from alternator.
- Unlock the connector (2) and disconnect it from the alternator (1).
- Slacken the bolts (3) and remove the holder from the alternator (1).
- Guide out alternator (1) and remove.
