Installing the left rail pressure sensor

Prerequisite 

Rail removed.

• Screw in and tighten the rail pressure sensor (1) into the rail.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALL THE HIGH-PRESSURE RAIL ON THE LEFT .
• Refer to INSTALLING SOUND INSULATION ON THE LEFT CYLINDER HEAD COVER .
• Refer to MOUNT THE WIRING HARNESS ON THE CYLINDER HEAD COVER ON THE LEFT .
• Refer to INSTALL ALL LEFT IGNITION COILS .
• Refer to INSTALL LEFT CLEAN AIR PIPE .
• Refer to CONNECTING THE LEFT CHARGE AIR LINE TO THE EXHAUST TURBOCHARGER
• Refer to INSTALLING THE LEFT UNFILTERED-AIR DUCT .
• Refer to INSTALLING INTAKE FILTER HOUSING .
• Refer to INSTALL ACOUSTIC COVER .
• Refer to INSTALL THE REAR TOP CROSS CONNECTION .
• Refer to INSTALL FRONT CROSS CONNECTION .
• Refer to INSTALLING FRONT-END STRUT ON LEFT AND RIGHT .
• Refer to INSTALLING THE COVER ON THE LEFT AND RIGHT IN THE ENGINE COMPARTMENT AT THE TOP
• Refer to DISCONNECTING ALL BATTERY GROUND LEADS .