Installing coolant pumps

• Replace gasket (1).

  Parts  : Gasket

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the sealing rings (1).

  Parts  : Sealing rings

Courtesy of BMW OF NORTH AMERICA, INC.

• Make sure that the fitting sleeve is in the crankcase.
• Clean sealing surface.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the coolant pump (1).
• Connect the connector (1) to the coolant pump (2) and lock audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the coolant pump (1) on the crankcase.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screw (1) (M6x90).

• Tighten the screw (2) (M6x70).

Fig 1: Coolant Pump Screws Tightening Sequence

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Pin up connector (1) and lock audibly.
• Connect and audibly lock coolant hose (2).
• Connect and audibly lock coolant hose (3).

Courtesy of BMW OF NORTH AMERICA, INC.

• Connect the coolant line (2) to the coolant pump.
• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Connect the coolant line (2) to the coolant pump.
• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to PUTTING ON THE DRIVE BELT .
• Refer to REMOVING SPECIAL TOOL ON BELT TENSIONER .
• Refer to SECURING THE COOLANT EXPANSION TANK IN THE HOLDERS .
• Refer to INSTALLING THE LEFT-HAND CHARGE AIR COOLER .
• Refer to INSTALLING FAN COWL .
• Refer to INSTALLING FRONT-END STRUT ON LEFT AND RIGHT .
• Refer to INSTALLING THE COVER ON THE LEFT AND RIGHT IN THE ENGINE COMPARTMENT AT THE TOP
• Refer to INSTALLING THE UNDERBODY PROTECTION OF THE STEERING GEAR OR THE FRONT THRUST FIELD .
• Refer to INSTALLING THE FRONT UNDERBODY PROTECTION OR FRONT THRUST FIELD .
• Refer to INSTALLING THE REAR TOP CROSS CONNECTION .
• Refer to INSTALLING FRONT CROSS CONNECTION .
• Refer to FILLING THE COOLING SYSTEM WITH THE VACUUM FILLING UNIT .
• Refer to FILLING THE LOW-TEMPERATURE COOLING SYSTEM WITH THE VACUUM FILLING EQUIPMENT .
• Refer to VENTING THE LOW-TEMPERATURE COOLING SYSTEM .
• Refer to INSTALLING ACOUSTIC COVER .