Install the tie rod
NOTE:
TECHNICAL INFORMATION
To avoid damage to the steering shaft and its bearing, the rack must be positioned in the steering gear as far as possible.
To avoid damage to the steering shaft and its bearing, the rack must be positioned in the steering gear as far as possible.
- Screw on and tighten the tie rod to the steering shaft with the special tool 0 496 483 (32 3 220).
TIGHTENING TORQUES SPECIFICATION
| Tie rod to steering box | ||
| Tightening torque | 105 Nm | |
Follow-up work
- Install the steering gear BELLOWS .
- Install TIE ROD END .
- Install front STIFFENING PLATE .
- Mount the WHEEL .
- Perform CHASSIS ALIGNMENT CHECK .