Mounting the cylinder head on the assembly jig

CAUTION: Heavy component.
Heavy components can lead to injury or damage.

Remove and install heavy components with the aid of another person/other persons.

Have the set of special tools 0 495 187 (00 2 300) ready.

Courtesy of BMW OF NORTH AMERICA, INC.

Number	Description
1	Assembly jig
2	Flange
3	Crank
4	cover panel
5	shelf
6	Rear shaped part
7	Collection pan
8	Front shaped part
9	Front wheel
10	Rear wheel with stop
11	Mat

Have the set of special tools 0 494 362 (11 9 000) ready.

Courtesy of BMW OF NORTH AMERICA, INC.

Number	Description
1	Stand
2	Rod
3	Adapter
4	Lug
5	Quick fastener
6	Aluminum frame insert
7	Shaped part
8	Plastic shaped part
9	lever
10	Hook
11	Valve spring cage
12	Valve spring cage
13	Valve spring cage
14	Valve spring cage
15	Valve spring cage
16	Valve spring cage
17	Valve spring cage

Prepare the special tool 2 220 718 .

Courtesy of BMW OF NORTH AMERICA, INC.
Position flange (1) on the assembly jig (2).
Tighten screws (arrows).

TIGHTENING TORQUES SPECIFICATION

Flange on assembly jig
M14X30	Tightening torque	135 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Prepare the special tool 0 490 567 (11 0 020) .

Courtesy of BMW OF NORTH AMERICA, INC.
Feed in and install the device (1) in arrow direction on the flange (2).
Make sure that the lock (3) engages audibly.

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screw (1).
Feed out the rod (2) in arrow direction and set it aside.

Courtesy of BMW OF NORTH AMERICA, INC.
Prepare plastic shaped parts (1) with the shaped parts (2) and aluminum frame insert (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Slide the quick-release bracket (1) in arrow direction up to the stop.

Courtesy of BMW OF NORTH AMERICA, INC.
Position completed aluminum frame insert (1) centered on the device (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Position the cylinder head (1) with the special tool 2 220 718 and the special tool 0 490 567 (11 0 020) on the device (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Position the cylinder head (1) correctly on the completed aluminum frame insert (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Lower the special tool 2 220 718 .
Guide out special tool 0 490 567 (11 0 020) on the cylinder head (1) and remove.
Remove special tool 2 220 718 and set it aside.

Courtesy of BMW OF NORTH AMERICA, INC.
Feed in and install the rod (1) in arrow direction.
Hand-tighten the bolt (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Position the screw connection (1) on the cylinder head (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Position the screw connection (1) on the cylinder head (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Keep the screws (1) (M10x90) ready from the special tool 0 494 150 (11 9 440) .
Keep the washers (2) ready from the special tool 0 494 150 (11 9 440) .

Courtesy of BMW OF NORTH AMERICA, INC.
Tighten the screws (1) from the special tool 0 494 150 (11 9 440) .

TIGHTENING TORQUES SPECIFICATION

Cylinder head on device
M10X90x1.5	Tightening torque	30 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Turn the device (2) on the crank (1) by 180° in arrow direction.

Courtesy of BMW OF NORTH AMERICA, INC.
Lock the quick-release bracket (1) in arrow direction.

Courtesy of BMW OF NORTH AMERICA, INC.
Turn the device (2) on the crank (1) by 180° in arrow direction.

Courtesy of BMW OF NORTH AMERICA, INC.