Installing the exhaust turbocharger (cylinder head removed)

Replace gasket.
Parts: Gasket
Mount the seal so that the part number (1) remains legible.

Courtesy of BMW OF NORTH AMERICA, INC.
Mount gasket (1).
If necessary, have the seal (1) set by an auxiliary person.
Ensure that the seal (1) is installed correctly on the guide pins.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the exhaust turbocharger and position it on the clamping strip.
Secure exhaust turbocharger against falling down.
Mount sliding rail (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten nuts in sequence (1) to (5).

TIGHTENING TORQUES SPECIFICATION

Exhaust manifold to cylinder head
Flange nut M7 Replace nuts.	1. Jointing torque	10 Nm
	2. Jointing torque	10 Nm
	3. Jointing torque	16 Nm
	4. Tightening torque	16 Nm

Fig 1: Exhaust Manifold Nuts Tightening Sequence

Courtesy of BMW OF NORTH AMERICA, INC.

Check for correct installation of the seal between the exhaust manifold and the cylinder head on the guide pins.