Installing pressure temperature sensor

NOTE: TECHNICAL INFORMATION
After replacing the pressure temperature sensor, a comparison with the diagnosis and information system must be carried out.

Clip in pressure temperature sensor (1).
Make sure the retaining lugs (2) are engaged correctly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALL DELIVERY UNIT .
Refer to CLOSE THE LOCKING RING .
Refer to INSTALLING THE HOUSING COVER FOR THE FUEL TANK .
Refer to INSTALLING THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
Refer to INSTALL LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL AT LEFT .
Refer to INSTALLING LOADING EDGE TRIM .
Refer to INSTALLING FRONT LUGGAGE COMPARTMENT FLOOR COVERING .
Refer to INSTALL THE REAR LUGGAGE COMPARTMENT FLOOR COVERING .
Refer to INSTALL REAR SEAT BACKREST
Refer to INSTALLING THE REAR SEAT BENCH .
Refer to INSTALL BACKREST SIDE SECTION, LEFT .
Refer to FILL FUEL TANK .