Remove delivery unit

NOTE: DANGER
High-voltage system.
The high-voltage system operates on the basis of hazardous, electrical voltage and high currents. Mortal hazard through electric shock!

All work on the high-voltage system may only be carried out by specially trained' and technically experienced personnel.
For additional information see:
61 00... SAFETY INSTRUCTIONS ON HANDLING HYBRID CARS .
For additional information see:
61 25... NOTES ON REPAIR OF HIGH-VOLTAGE BATTERY UNIT .

Preliminary work

Refer to VENTILATE THE FUEL TANK .
Refer to REMOVE LEFT BACKREST SIDE SECTION .
Refer to REMOVE REAR SEAT BENCH .
Refer to REMOVE REAR SEAT BACKREST .
Refer to REMOVE THE REAR LUGGAGE COMPARTMENT FLOOR COVERING .
Refer to REMOVE LUGGAGE COMPARTMENT FLOOR COVERING .
Refer to REMOVING THE LOADING EDGE TRIM .
Refer to REMOVE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON LEFT .
Refer to REMOVING RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
Refer to SUCTION THE FUEL TANK .
Refer to REMOVING THE HOUSING COVER FOR THE FUEL TANK .
Refer to OPENING THE LOCKING RING .

Lift the flange lid (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Disconnect plug connection (1).
Detach cable from holder.

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock and detach the snap fastener (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock lock (1) arrow direction from the top.
Slightly push delivery unit (2) in arrow direction and feed out to the top.

Courtesy of BMW OF NORTH AMERICA, INC.