Install the carriage for the water channel on the left and right
- Insert the carriage (1) into the recess and push it towards the rear.
- Fold the control lever (1) towards the rear and insert it into the guide rail.
- Position the spacer (1) of the control lever in the guide rail.
- Move the gate (1) towards the rear.
NOTE:
TECHNICAL INFORMATION
Make sure that both carriages for the water channel are pushed back as well. If necessary, secure carriages for water channel with a cord so that they can be pulled back out again later on.
Make sure that both carriages for the water channel are pushed back as well. If necessary, secure carriages for water channel with a cord so that they can be pulled back out again later on.
- In this process, press down the lever (2) to ensure it correctly runs into the rail in this area (A).
- Move the gate (1) towards the rear until the recess for the limit position (2) is exposed.
- Insert the limit position (2).
- Move the gate (1) to vent position and pull out both carriages for the water channel.
Follow-up Work
- Install the glass slide/tilt sunroof WATER CHANNEL .
- Install glass slide/tilt SUNROOF PANEL .
- Check the glass slide/tilt SUNROOF PANEL SETTING .
- Adjust glass slide/tilt SUNROOF PANEL .
- Initialize glass SLIDE/TILT SUNROOF
- Install the glass slide/tilt SUNROOF GAITER .