Equipment specification without gasoline particulate filter: Install the wiring harness for the engine transmission module
Overview graphic for the engine wiring harness, transmission module
- Feed in the engine wiring harness of the transmission module.
- Connect connectors (1) and lock.
- Position the connector (2).
- Turn the connector with the bayonet closure (2) clockwise and lock.
- Engage the detents of the transmission wiring harness (1).
- Position the grounding point.
- Tighten down screw (2).
TIGHTENING TORQUES SPECIFICATION
| Ground connection on transmission | ||
| M6x12 screw | Tightening torque | 10 Nm |
- Engage the detents of the transmission wiring harness (1).
- Connect connectors (2) and lock.
- Clip the wiring harness into the retaining clips (1) and (3).
- Secure the wiring harness mounting (2).
- Connect connectors (1) and lock.
- Secure the wiring harness in area (2) at the clips (1).
- Insert the wiring harness in area (1).
- Clip in the wiring harness at the retaining clip (2).
- Position the grounding point (2).
- Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATION
| Ground connection on cylinder head cover | ||
| M6x14 screw | Tightening torque | 10 Nm |
- Clip in the wiring harness at the retaining clip (3).
- Clip in the clip (1) of the vehicle wiring harness.
- Connect connectors (2) and lock.
- Clip in the clip (1) of the vehicle wiring harness.










