Installing the oil-level sensor

• Insert and install the oil-level sensor (2).
• Tighten the nuts (arrows).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Oil-level sensor to oil sump
  M6	Joining torque	2 Nm
  	tightening torque	8.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.

  The connector (1) must engage audibly.

  NOTE: The following step(s) must be performed if the listed component(s) is/are installed.
• Mount the cover (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to FILLING ENGINE OIL .
• Refer to OPENING THE OIL FILLER CAP .
• Refer to INSTALLING THE CENTER UNDERBODY PROTECTION .
• Refer to CHECKING ENGINE OIL LEVEL .