TPMS Reminder Reset - Procedure 08

Reset Using iDrive:

1. "My Vehicle".
2. "Vehicle Status".
3. [Reset] "Tire Pressure Monitor".
4. Start the engine but do not drive off.
5. Reset tire inflation pressure: "Perform Reset".
6. Drive away.
7. The wheels are displayed in gray and the following is displayed "Resetting Tire Pressure Monitor"

After driving faster than 19 mph (30 km/h) for a short period, the set tire inflation pressures are accepted as reference values. The reset is completed automatically while driving. You may interrupt this trip at any time. When you continue the reset resumes automatically.

After a successfully completed reset, the wheels on the Control Display are shown in green and "Tire Pressure Monitor active. See label for recommended pressures." is displayed.