Install bumper panel, front
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Install the bumper panel (1).
- Engage the bumper panel (1) in the area of the upper active air-flap control (2) in the mountings.
- Connect the connector (1) on the right side and lock it.
- Attach plug connection (1) in holder (2).
- Connect the hose for the headlight cleaning system.
NOTE:
Description is for left component only.
Procedure on the right side is identical.
Procedure on the right side is identical.
- Tighten the screws (1).
TIGHTENING TORQUES SPECIFICATION
| Bumper panel on side wall | ||
| Screw | Tightening torque | 3 Nm |
- Tighten the screws (1).
TIGHTENING TORQUES SPECIFICATION
| Underbody protection | ||
| Screw | Tightening torque | 3 Nm |
Follow-up Work
- Install FRONT GRILLE .
- Install (partially removed) front section of front wheel ARCH COVER