Wiper Arm Adjustment Tool - Update Kit (SI B04 13 19)

WIPER ARM ADJUSTMENT TOOL - UPDATE KIT

TECHNICAL SERVICE BULLETIN

SITUATION

Distribution of the following tool will be through the Automatic Tool Shipment Program. Additional tools may be purchased through your Regional Distribution Center (RDC). All prices in this bulletin are introductory prices and are only valid during the Automatic Tool Shipment.

Shipments of special tools may be delayed up to 2 weeks (after publication) depending on the RDC workload.

The update kit below will allow the tool to be used on wiper arms with a wider designed. The original tool P/N 83 30 0 495 346 was sent out Automatic Tool Shipment under SI B04 13 06.

Wiper Arm Adjustment Tool Update Kit Order P/N 83 30 2 463 352 Price= $13.00

1. Pressure Plate
2. Knurled Screw

1. Unscrew the original tools adjustment knob (2) from the housing (1).
2. Remove pressure plate (3).
3. Mount the new knob and pressure plate in reverse order.

WARRANTY INFORMATION

Terms of the Parts department Special Tool Warranty can be viewed and printed by following the path below:

• Go to TIS 2
• Select "Tools and Equipment."
• Select "FAQ & Top Links
• Select "Special Tool Warranty Information."