8HP Transmission Park Release Tool (SI B04 20 19)
Publication date: 2020-04-06Reference number: SI B04 20 19
8HP TRANSMISSION PARK RELEASE TOOL
SERVICE CAMPAIGN BULLETIN
| BMW: | All with 8HP 50/75 transmission |
SERVICE INFORMATION
What's New (Specific text highlighted):
- Automatic Tool Shipment is complete
- Pricing updated
- Warranty
Starting with approx. 2015 production
SITUATION
Distribution of the following tool is complete.
- Additional tools may be purchased through your Regional Distribution Center (RDC)
- All prices in this bulletin are introductory prices and are only valid during the Automatic Tool Shipment
- Shipments of special tools may be delayed up to 2 weeks (after publication) depending on the RDC workload
-
NOTE: Watch the instruction video and read the instructions carefully before using the tool.
- Always follow the safety instructions!
8HP Transmission Park Release Tool Order P/N 83 30 5 A0B 522
Price= Refer to Parts system "ATLAS"
The 8HP Park Release Tool will only work on this style park lever.
The 8HP Park Release Tool will not work on this style park lever. Please note the adjustment screw.
Included with the Release Tool:
- Remote park release mechanism
- Short lever
- Long lever
- Plastic case -Wheel chocks (supplied separately, refer to bottom of service information) may be stored in this case also
Wheel Chock
Order P/N 71 12 6 756 392
Price= $25.00 (each)
- 2 pieces will be auto shipped
- Wheel chocks may be stored in the Release tool plastic case
- Wheel chocks will be shipped in a separate shipment
Information Sources
Instructions and a video are available by following the directions below.
Instructions:
- Go to TIS2
- Tools & Equipment
- FAQ & Top Links
- Top Links
- 8HP Park Release Tool
Video:
https://www.youtube.com/watch?v=AdjjTQ4vE8Y&feature=youtu.be
If the above link does not open, copy and paste it into your browser.
WARRANTY INFORMATION
Performing the release procedure is claimable in conjunction with an applicable repair that is covered under the BMW Limited Warranties.
| Defect Code: | Refer to AIR | Defect Code that applies to the repair work which necessitated the additional work procedure below to be performed |
|---|---|---|
| Labor Operation | Description (Associated work) | Labor Allowance |
| 24 00 500 | Unlock parking lock for 8HP 50/75 automatic transmission mechanically on vehicle lift with special tool 83305A0B522k | Refer to AIR |
RELEASE TOOL - WARRANTY INFORMATION
The limited Tool warranty is administered by AGA Tools and Products -details below.
The warranty period is 12 months from the date of tool's purchase.
In the event of a warranty or service replacement part-related issue, please refer to the AGA Contact information below:
AGA Tools and Products
545 Corporate Drive
Escondido, CA 92029
Phone: 760-738-4084
Email: rich@agatools.com