Install front grille
Prerequisite
Front flap is open.
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- G11/G12 to 3.19, G30/G31/F90 to 7.20 or G38 to 9.20:
Check all catches for damage, if necessary replace the decorative front grille (1).
Position the decorative front grille (1) at the top three catches.
Do not engage the latches yet.
- Decorative front grille (1) in the area of the headlight in the direction of the arrow push down , until the latches engage below.
- Press on the front grille (1) at all latching points until you hear all latches snap into place.
- G11/G12 from 3.19, G30/31/F90 from 7.20 or G38 from 9.20:
Check all catches (2) for damage, if necessary replace the decorative front grille (1).
Position the decorative front grille (1) on the catches (2) at the top.
Latches (2)not yet snapped.
Position the decorative front grille (1) at the catches below.
Latches not yet snapped
Press on the front grille (1) at all latching points until you hear all latches snap into place.
- Carry out a tensile test on the decorative front grille (1).
- Hold each kidney longitudinal rod with both hands as shown and pull on it to check that the front grille (1) is firmly seated.
- If necessary, reprint the decorative front grille (1) on all latches.
