Install the door lock of the driver's door

• Attach the Bowden cable nipple (2).
• Attach the Bowden cable (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach the linkage (1) in the door lock (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Guide in the door lock (1) together with the outer door handle support.
• Attach wiring harness.
• Connect the connector on the door lock (1).
• Position screws (2) to (4).
• Tighten the screws in the following sequence: (2) - (3) - (4).

• Clip in locking rod (5).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Version with Automatic Soft Close system: 

Fasten Automatic Soft Close drive (1) to the door.

Attach the connector for Automatic Soft Close drive (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Install the attachment hood (2).
• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up Work 

• Install the front outside DOOR HANDLE .
• Install the front door MODULE CARRIER .
• Install the front door WEATHER STRIP .
• Install front door TRIM PANEL .
• Attach the door handle COVER .
• Fit exterior MIRROR .
• Install the mirror triangle COVER .
• ACTIVATE the 48 v electrical system.