Install the side trim panel in the footwell at the left A-pillar
- Check the clips (3) for damage and replace if necessary.
- Position the side trim panel (2) and engage it in the clips (3).
- Make sure that the side trim panel (2) is correctly fitted against edge protection.
- Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATION
| A-pillar footwell side trim panel | ||
|---|---|---|
| Screw | Tightening torque | 2.5 Nm |
- Install bonnet release lever (1).
- Pull bonnet release lever (1) towards the rear.
- Install locking wedge (2).
Follow-up Work
- Install the front door sill COVER STRIP .
- Install the pedal mechanism TRIM PANEL .

