Install upper B-pillar trim panel
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Mount B-pillar trim panel (1) and thread in belt.
- Thread in upper B-pillar trim panel (1) on headliner and clip into clips (2).
- Check for correct seating of B-pillar trim panel (1) on edge protection at front and rear.
- Move front seat all way forward and up.
- Insert the end fitting (2).
- Replace the screw (1).
Parts: Screw
- Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATION
| End fitting to seat mechanism | ||
|---|---|---|
| M10 Replace screw. |
Tightening torque | 42 Nm |
