Install coolant temperature sensor
- Install coolant temperature sensor (2) and tighten.TIGHTENING TORQUES SPECIFICATION
Coolant temperature sensor to crankcase/coolant pump Sensor Tightening torque 18 Nm - Attach and lock the connector (1).
The connector (1) must engage audibly.
Follow-up work
- Refer to PUTTING ON THE DRIVE BELT
- Refer to INSTALL THE COOLANT EXPANSION TANK FOR THE LOW-TEMPERATURE COOLANT CIRCUIT .
- Refer to CHECK THE COOLANT LEVEL IN THE LOW-TEMPERATURE COOLANT CIRCUIT AND TOP UP, IF NEEDED .
- Refer to INSTALLING FAN COWL .
- Refer to INSTALL THE REAR TOP CROSS CONNECTION .
- Refer to INSTALL FRONT CROSS CONNECTION .
- Refer to INSTALLING FRONT-END STRUT ON LEFT AND RIGHT .
- Refer to INSTALLING THE COVER ON THE LEFT AND RIGHT IN THE ENGINE COMPARTMENT AT THE TOP