Install the headlining on the left or right (with SA403 glass roof)
Prerequisite
Glass roof is open.
- Feed in the headlining on the relative edge protection.
- Secure the frame (1) to the roof using the clips (2).
- If necessary, clip in the cable clip into the frame (1).
- Clip in the headlining using the clips (1).
- Secure the frame (1) to the roof using the clips (2).
- Clip in trim (1) using clips (2).
- Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATION
| Headlining | ||
|---|---|---|
| Tightening torque | 2.5 Nm | |
- Tighten the screws (1).
TIGHTENING TORQUES SPECIFICATION
| Headlining to panorama glass roof | ||
|---|---|---|
| Tightening torque | 1.2 Nm | |
Follow-up Work
- Install the left or right GRAB HANDLES
- Install c-pillar TRIM PANEL .
- Install upper b-pillar TRIM PANEL .
- Install rear interior roof LIGHT .
- Install the interior MIRROR .
- Install the interior mirror COVERS .
- Install roof function CENTER (FZD).
- Install the SUN VISOR .
- Install the sun visor counter SUPPORT .
- Install the front left or right vanity mirror LIGHT .
- Install the right hands-free MICROPHONE .
- Install the a-pillar TRIM PANEL .





