Install the temperature sensor at the cylinder head
NOTE:
RISK OF DAMAGE
Contaminant or foreign body.
Contamination can result in malfunctions, loss of function or leaks.
Contaminant or foreign body.
Contamination can result in malfunctions, loss of function or leaks.
- Adhere to the utmost cleanliness.
- Protect components from contamination e.g. by covering.
- Close off line connections with seal plugs.
- Feed in and install the temperature sensor on the cylinder head (2).
- Tighten the temperature sensor on the cylinder head (2).TIGHTENING TORQUES SPECIFICATION
Temperature sensor to cylinder head M12x1.5 Tightening torque 2 Nm - Connect and lock the connector (1).
The connector (1) must engage audibly.
Follow-up work
- Refer to INSTALL CHARGE AIR LINE .
- Refer to INSTALL BOTTOM CLEAN AIR PIPE .
- Refer to INSTALL CLEAN AIR PIPE, TOP .
- Refer to INSTALLING INTAKE SILENCER HOUSING .
- Refer to INSTALL ACOUSTIC COVER .