Install the rail pressure sensor

• Insert and install the rail pressure sensor (2).
• Tighten the rail pressure sensor (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUES SPECIFICATION
  
  

  Rail pressure sensor
  M14x1.5 Grease thread lightly.	Tightening sequence	30 Nm

• Connect connectors (1) and lock.

  The connector (1) must engage audibly.

• Check fuel system for leak tightness.

Follow-up work 

• Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
• Refer to INSTALL ACOUSTIC COVER .