Installing the high-pressure line between the high-pressure pump and the high-pressure rail

• Guide the special tool 2 413 106  out and remove.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Thread in and install the high pressure line (2).
• Tighten union nut (1) hand tight.
• Tighten union nut (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up works 

• Refer to INSTALL ALL IGNITION COILS .
• Refer to WHEN WORKING ON THE LAST CYLINDER: MOUNTING THE SERVICE OPENING IN THE SOUND INSULATION ON TOP OF THE ENGINE .
• Refer to INSTALL THE CYLINDER HEAD COVER ACOUSTIC COVER .
• Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
• Refer to INSTALLING ACOUSTIC COVER .