Removing the high-pressure nozzle of the headlight cleaning system
- Lever out the cover (1) using special tool 0493 687 (009 340).
- Slowly pull out high-pressure nozzle of headlight cleaning system from cover (1).
- Unclip the cover (2) from the guide (1) at the side in the direction of the arrow and remove to the front.
- Allow the high-pressure nozzle (3) of the headlight cleaning system to slide back slowly.
- Unlock and disconnect high pressure line (1).
- Unlock the latch mechanisms (2).
- Remove the high-pressure nozzle (3) towards rear.
